type crg series product ? specification 1 st april 2003 issue 2 telephone tyco passive product support team ++ 44 (0) 1793 572484 website ? passives.tycoelectronics.com email ? passivesales@tycoelectronics.com page 1 of 4 thick film chip resistors type crg series precious metal terminations are screen printed onto a ceramic base and fired. the resistive element is screen printed and fired and the passivation layer added. each resistor is trimmed to tolerance by laser. the pre-scribed tile is broken into strips, the end plating is fired on and the strips broken into individual components. final termination is made by electroplating. key features ? thick film resistors with a high power to size ratio, ideally suited to industrial and general purpose use. a range from 1 ohm to 10 mohms and tolerances of 1% and 5%. also including zero ohm links. ? crg chip resistors are suitable for most applications, including high frequency operation, owing to the short lead structure and low capacitance. stockists: this product is stocked by rs and micromark.
type crg series product ? specification 1 st april 2003 issue 2 telephone tyco passive product support team ++ 44 (0) 1793 572484 website ? passives.tycoelectronics.com email ? passivesales@tycoelectronics.com page 2 of 4 dimensions derating curve specifications units 0402 0603 0805 rated power @ 70 c watts 0.063 0.1 0.125 resistance range min ohms 10 1 10 10 1 10 10 1 10 max ohms 1m0 9r1 3m3 1m0 9r1 10m 1m0 9r1 10m % 1 5 5 1 5 5 1 5 5 tolerance code letter f j j f j j f j j selection series e24 e24 e24 e24 e96 e24 e24 e24 e96 e24 e24 temperature coefficient ppm/c 100 350 200 100 350 200 100 350 200 1206 2010 2512 rated power @ 70 c watts 0.25 0.5 1 resistance range min ohms 10 1 10 10 1 10 10 1 10 max ohms 1m0 9r1 10m 1m0 9r1 10m 1m0 9r1 10m % 1 5 5 1 5 5 1 5 5 tolerance code letter f j j f j j f j j selection series e24 e96 e24 e24 e24 e96 e24 e24 e24 e96 e24 e24 temperature coefficient ppm/c 100 350 200 100 350 200 100 350 200 units 0402 0603 0805 1206 2010 2512 working voltage volts 50 75 150 200 200 200 maximum overload voltage volts 100 150 300 400 400 400 operating temperature range c -55 to +125 climatic category 55/125/56 insulation resistance dry min mohms 1,000 stability % 3 surface temp rise max c/w 400 zerohm current max amps 1 1 2 2 2 2 resistance max <20 mohm style l w t a b 0402 1.0 0.1 0.5 0.1 0.35 0.05 0.2 0.1 0.25 0.1 0603 1.6 0.1 0.8 0.1 0.45 0.1 0.3 0.2 0.2 0.1 0805 2.1 0.2 1.3 0.1 0.5 0.1 0.4 0.2 0.3 0.2 1206 3.1 0.2 1.55 0.1 0.55 0.1 0.45 0.2 0.4 0.2 2010 5.0 0.2 2.5 0.2 0.6 0.1 0.6 0.2 0.6 0.2 2512 6.4 0.2 3.2 0.2 0.6 0.1 0.7 0.2 0.7 0.2
type crg series product ? specification 1 st april 2003 issue 2 telephone tyco passive product support team ++ 44 (0) 1793 572484 website ? passives.tycoelectronics.com email ? passivesales@tycoelectronics.com page 3 of 4 mounting the resistors are suitable for processing on automatic placement equipment. marking crg0805, crg1206, crg2010, crg2512 e24 series resistors are marked with a three digit code. e96 series resistors are marked with a four digit code. zerohm components are marked '0'. crg0603 e24 5% series are marked with a three digit code. e24 1% series are marked with a three digit code. e96 series are marked with the international alpha numeric three character code (available on request). except 10, 11, 13, 15, 20 & 75 decades which are marked as the e24 series. crg0402 series unmarked. storage unopened reels should be stored within a temperature range of +5 c to +25 c, separated from any dust, chemicals and solvent b ased materials. non-adherence to this procedure could effect the solderability of this product. packaging all chip resistors are supplied on reels. for details, see figures 1 - 4. also available in bulk cassettes.
type crg series product ? specification 1 st april 2003 issue 2 telephone tyco passive product support team ++ 44 (0) 1793 572484 website ? passives.tycoelectronics.com email ? passivesales@tycoelectronics.com page 4 of 4 packaging (cont'd) larger reel sizes available on request. performance characteristics the evaluation of the performance characteristics is carried out with reference to iecq specifications qc 400 000 and qc 400 10 0. how to order orders for these components should include the following information:- type, tolerance code letter and value e.g. crg0603 j 1k0 (crg0603zr for zerohm links) 0402 0603 0805 1206 2010 2512 tape width 8 8 8 8 12 12 pitch 2 4 4 4 4 4 a tol 0.63 0.05 1.1 0.2 1.65 0.2 2.0 0.15 2.9 0.1 3.4 0.1 b tol 1.13 0.05 1.9 0.2 2.4 0.2 3.6 0.2 5.3 0.1 6.6 0.1 t1 tol 0.55 0.1 0.7 0.1 0.9 0.1 0.9 0.1 1.0 0.1 1.0 0.1 t2 max 0.5 0.8 1 1 - - reel qty. 10000 5000 5000 5000 4000 4000 test ref long term tests (3% + 0.1 ohm) 4.23 climatic sequence 4.24 damp heat, steady state 4.25.1 endurance at 70 c 4.25.3 endurance at 125 c test ref short term tests (1% + 0.05 ohm) 4.13 overload 4.32 adhesion 4.33 bond strength of end face plating 4.19 rapid change of temperature 4.18 resistance to soldering heat this publication is issued to provide outline information only and (unless specifically agreed to the contrary by the company i n writing) is not to form part of any order or be regarded as a representation relating to th e products or service concerned. we reserv e the right to alter without notice the sp ecification, design, pric e or conditions of supply of any product or service. whilst ty co electronics components products are of the very highest quality and reliability, all electronic compone nts can occasionally be subject to failure. where failure of a tyco electronics components product coul d result in life threat ening consequences, then the circuit and application must be discussed with the company. such areas might include ecg, respiratory and other medical and nuclear a pplications and any no n fail-safe applications circuit.
|
